High Temp Resistant Model Resin
Key Features
RF-CI-808 is a specialty resin for high-temperature dental model printing. It offers fast forming speed, high forming precision, ultra-high surface hardness, and excellent detail reproduction. Its stable material structure withstands the high-pressure and high-temperature impact of hot-pressing molding instruments, making it well suited for thermoforming workflows.
Basic Performance
| Properties | Unit | Standard | Result |
|---|---|---|---|
| Density | g/cm3 | ASTM D792 | 1.05-1.15 |
| Viscosity | mPa·s | ASTM D445 | 1100 |
| Hardness | Shore D | ASTM D2240 | 83-87 |
| Tensile Strength | MPa | ASTM D638 | 61.4 |
| Elongation at Break | % | ASTM D638 | 17.2 |
| Flexural Strength | MPa | ASTM D790 | 69.6 |
| Flexural Modulus | MPa | ASTM D790 | 1713 |
| HDT @ 0.45 MPa | °C | ASTM D648 | 68 |
Printing Parameters
Representative machine parameters are listed below. Contact us for additional validated printer profiles.
| Printer | Exposure (s) | Base Exp. (s) | Base Layers | Lift Height (mm) | Lift Speed (mm/min) | Retract Speed (mm/min) |
|---|---|---|---|---|---|---|
| Phrozen Sonic Mini 8K S | 2.5 | 10 | 3 | 8 | 120 | 120 |
| Anycubic Photon Mono 2 | 2 | 15 | 3 | 8 | 120 | 120 |
| Anycubic Photon Mono | 2 | 12 | 3 | 8 | 120 | 120 |
| Elegoo Saturn 4 Ultra | 3 | 25 | 3 | Device default parameter | ||
Post-Processing & Storage
-
1
Wash – Rinse residual resin from the surface with water first, then clean with water or IPA in an ultrasonic cleaner. Avoid high-frequency shock or forceful brushing to protect fine surface details.
-
2
Dry – Thoroughly blow the model dry with an air gun, hair dryer, or similar tool.
-
3
Remove Supports – Remove supports before post-curing. Removing them after curing can easily damage the support contact area.
-
4
Post-Cure – For applications requiring certain toughness, UV cure for about 5 minutes. Store printed parts in a cool, dry place after curing.
Storage
Store below 25°C in a cool place away from direct sunlight. Keep away from visible light to prevent resin polymerization and gelation.
Safety
Eyes: Flush with clean water for at least 20 minutes and seek medical attention immediately. Skin: Remove contaminated clothing and wash thoroughly with soap and water. Not approved for food, drink, or direct medical use on the human body. See MSDS for details.
Machine Compatibility
Open-system compatible with all major LCD / MSLA / DLP dental 3D printers. Parameter profiles available upon request.
Don’t see your printer? Contact us – we verify new platforms regularly.
Clinical Applications
Designed for high-temperature dental model production and stable thermoforming workflows.
Ready for reliable thermoforming model production?
Request a sample or contact our application engineers for machine-specific parameters and workflow support.
Explore More Materials
Discover more dental model materials built for precision, efficiency, and workflow stability.