Gingiva Mask Resin
Key Features
RF-YY-10 is a dental-grade 3D printing resin for flexible simulated gingiva. By combining with dental model materials, it enables functional 3D reconstruction of gingival model fragments. The material features superior elasticity, tear resistance, and excellent molding stability with no shrinkage or aging over time. Long-term flexibility is guaranteed, and the material produces no irritating odor.
Basic Performance
| Properties | Unit | Standard | Result |
|---|---|---|---|
| Density | g/cm³ | ASTM D792 | 1.10–1.16 |
| Viscosity | mPa·s | ASTM D445 | 2000–3000 |
| Hardness | Shore A | ASTM D2240 | 40A |
| Tensile Strength | MPa | ASTM D638 | 31.4 |
| Elongation at Break | % | ASTM D638 | 172 |
Printing Parameters
Representative machine parameters are listed below. Contact us for additional validated printer profiles.
| Printer | Exposure (s) | Base Exp. (s) | Base Layers | Lift Height (mm) | Lift Speed (mm/min) | Retract Speed (mm/min) |
|---|---|---|---|---|---|---|
| Phrozen Sonic Mini 8K S | 6 | 10 | 3 | 10 | 120 | 120 |
| Elegoo Saturn 4 Ultra | 6 | 20 | 3 | Default standard parameters of the device | ||
| Elegoo Saturn 3 Ultra | 7 | 25 | 3 | 4+4 | 60+180 | 180+60 |
| Creality Halot-MAGE Pro | 6 | 20 | 3 | 8 | 120+180 | 180+120 |
| Anycubic Mono 4 Ultra | 4.7 | 35 | 3 | 4+4 | 90+120 | 180+120 |
Post-Processing & Storage
-
1
Wash – Clean the model with absolute ethanol or isopropyl alcohol using a low-frequency ultrasonic cleaner. Avoid high-frequency or high-power ultrasonic cleaning as it may damage the model surface.
-
2
Dry – Thoroughly blow the model dry with a hair dryer or similar tool.
-
3
Remove Supports – Remove supports before post-curing. Removing supports after post-cure may damage the contact surface at support points.
-
4
Optional Post-Cure – For occasions where certain toughness is required, UV cure for 5 minutes. Store printed parts in a cool, dry place.
Storage
Store below 25°C in a cool place away from direct sunlight. Keep away from visible light to prevent resin polymerization and gelation.
Safety
Eyes: Flush with clean water for at least 20 minutes and seek medical attention immediately. Skin: Remove contaminated clothing and wash thoroughly with soap and water. Not approved for food, drink, or medical application on the human body. See MSDS for details.
Machine Compatibility
Open-system compatible with all major LCD / MSLA / DLP dental 3D printers. Parameter profiles available upon request.
Don’t see your printer? Contact us – we verify new platforms regularly.
Clinical Applications
Designed for printing flexible simulated gingiva on implant dental models, enabling precise functional reconstruction of gingival tissue for digital prosthodontics workflows.
Ready for precise, flexible gingival simulation?
Request a sample or contact our application engineers for validated parameters and printing workflow support.
Explore More Materials
Discover more dental resin materials built for precision, efficiency, and clinical reliability.