This May, RayForm is taking its dental 3D printing portfolio on a two-stop European tour: Morocco Dental Expo 2026 in Casablanca (May 7–10), followed one week later by Expodental Meeting 2026 in Rimini (May 14–16). For dental laboratories, clinics, and clear aligner manufacturers planning their spring evaluation calendars, both shows are within a single travel window — and our booth team will be on the floor at each one.
The global dental 3D printing market is on a steep adoption curve, projected to grow from USD 3.96 billion in 2025 to USD 10.06 billion by 2030[6]. Behind that headline number is a practical question every lab and clinic owner is now asking: which printer, which resin, which workflow actually scales without breaking? That’s exactly the conversation we want to have at both booths.
Why We’re Showing Up in Both Casablanca and Rimini
The two events serve very different audiences, and that’s exactly why we’re attending both.
Morocco Dental Expo is the largest dentistry exhibition in Africa, organized by ATELIER VITA under the patronage of Morocco’s Ministry of Health, now in its 7th edition[1][2]. It’s the regional gateway for clinics, labs, and distributors across the Maghreb, West Africa, and parts of Francophone Sub-Saharan Africa — markets where digital dentistry adoption is accelerating but where local distribution and training support are still scarce.
Expodental Meeting Rimini is Italy’s leading dental trade fair and one of the most established in Southern Europe, with the 2025 edition drawing more than 21,000 visitors and over 400 exhibitors[4]. The 2026 edition will continue that trajectory, with dedicated thematic areas including Expo 3D for digital workflows and Tecnodental Forum for laboratory technology — both directly relevant to the printer, resin, and aligner production audience we serve[5].
Different geographies, different buying stages, same underlying question: how do you build a dental 3D printing workflow that runs reliably day after day. That’s the conversation we’re prepared to have.
Both Shows at a Glance
| Item | Morocco Dental Expo 2026 | Expodental Meeting 2026 |
|---|---|---|
| Dates | May 7 – 10, 2026 | May 14 – 16, 2026 |
| City | Casablanca, Morocco | Rimini, Italy |
| Venue | ICEC – Ain Sebaâ Exhibition Center | Fiera di Rimini, South Pavilions |
| RayForm Stand | C10a | Hall A1, Stand 18 |
| Edition | 7th edition | Annual edition |
| Audience focus | African and Maghreb dental community | Italian + Southern European labs, clinics, distributors |
What You’ll See at the RayForm Booth
We’re bringing our full dental 3D printing solution stack to both shows. Every product on display is one our customers actually run in production today — not a prototype.
LCD Dental 3D Printers
Our LCD printer lineup spans desktop chairside use to high-throughput laboratory production, all built around the open-material principle so customers aren’t locked into a single resin ecosystem. The booth team will run live print demonstrations of dental models, surgical guides, and clear aligner models throughout each show day. If you’ve never seen an 8K LCD printer pull a full-arch model in under 30 minutes, this is a good chance.
VAT photopolymerization technologies — including the LCD and DLP families — currently hold the largest share of the dental 3D printing market because of their accuracy and broad compatibility with dental resins[6]. That technical fit is exactly why we focused our hardware roadmap there. See our full desktop and production printer lineup.
Dental Resin Lineup
Our resin portfolio covers the workflows most labs and clinics actually run: dental models (high-temperature and water-washable), surgical guides, gingiva masks, IBT, temporary crowns and bridges, hard and soft splints, castable wax, invisible denture base, and clear aligner resin. Each resin is produced as a dental-grade biocompatible material under strict quality management, and is designed to stay compatible with mainstream open LCD and DLP printers — so your existing hardware investments don’t get stranded.
The orthodontics segment, particularly clear aligner production, is currently expected to be the fastest-growing application within dental 3D printing through the end of the decade[7]. That’s where our resin development effort is most concentrated.
Browse the full dental resin catalog ahead of your visit.
Clear Aligner Materials
For orthodontic labs and clear aligner factories, our clear aligner sheet material lineup will be on physical display — including thickness variations and the 4D shape-memory grade. Bring a thermoforming sample request if you’d like us to run feasibility specs together at the booth.
Automated Post-Processing System
Post-processing is where a lot of digital workflows quietly bleed margin. Our automated washing, drying, and UV curing system is built to standardize that bottleneck, especially for clear aligner and high-volume model production. Live demonstrations at both booths.
Four Reasons to Visit Us In Person
There’s a meaningful difference between reading a spec sheet and watching a printer pull a real part while the operator answers your questions in real time. Here’s what we’re prepared to do that a website can’t:
- Live print demos. See real model, splint, and aligner builds running during the show. Bring a CAD file if you want a specific test.
- Free resin sample requests. Tell us what application you’re qualifying — model, splint, aligner, IBT — and we’ll arrange a sample shipment after the show, with print parameter notes for your specific printer.
- One-on-one workflow consultation. Skip the marketing pitch. Bring your actual production bottleneck (yield, post-processing time, equipment compatibility, throughput per shift) and we’ll walk through what other labs running similar volumes have done to fix it.
- Volume pricing and OEM discussion. If you’re a distributor, group purchaser, or aligner manufacturer evaluating a longer-term supply relationship, both shows are the right venue for that first conversation.
Show 1 — Morocco Dental Expo 2026 (Casablanca)
The show is the largest dentistry event in Africa, drawing oral health professionals from across the continent and from key European, Middle Eastern, and Asian supplier markets[1]. Casablanca itself is Morocco’s economic capital and the practical entry point for international dental brands looking to build distribution coverage across North and West Africa.
If you’re a clinic in Casablanca, Rabat, Marrakech, Tangier, or beyond — or a distributor evaluating new supplier relationships for the African market — Stand C10a is open to walk-ins all four days. To save time, pre-book a slot via WhatsApp.
Show 2 — Expodental Meeting 2026 (Rimini)
Expodental Meeting is recognized as Italy’s leading dental trade fair and one of the most internationally significant in Southern Europe[3][5][8]. The 2026 edition has already confirmed strong industry commitment, with 92% of exhibition space sold and 300+ exhibitors signed on at last reporting[4]. The dedicated Expo 3D area focuses specifically on digital dentistry workflows — making this the most direct match for our printer, resin, and aligner solution audience[5].
For Italian and broader European labs evaluating new printer or resin suppliers, Hall A1 Stand 18 is where we’ll be all three show days. Pre-booking a meeting helps us give you proper attention away from booth traffic peaks.
How to Pre-book Your Booth Visit
Walk-ins are welcome, but a 20–30 minute pre-booked slot lets us assign the right team member, prepare relevant samples, and give you time to ask the questions that actually matter. To pre-book:
- WhatsApp: +86 156 7514 4495 (mention which show + which day)
- Email: contact@rayformtech.com
- Subject line suggestion: “Booth meeting request — [Casablanca / Rimini] — [your company]”
Can’t Make It? Here’s How to Connect
If neither show fits your travel plans, you have other options:
- Request a free resin sample by emailing contact@rayformtech.com with the resin type and printer model you’re evaluating
- Browse the full product catalog on our website at any time
- Stay tuned for post-show recaps — we’ll publish on-floor highlights, customer conversations, and live demo footage from both events shortly after the shows close
If you have a specific application question — clear aligner production, full-arch model accuracy, splint material selection, OEM resin compatibility — feel free to contact our team directly and we’ll route you to the right specialist.
FAQ
Where will RayForm exhibit in May 2026?
RayForm will exhibit at two consecutive shows: Morocco Dental Expo 2026 (May 7–10, ICEC Ain Sebaâ Casablanca, Stand C10a) and Expodental Meeting 2026 (May 14–16, Fiera di Rimini Hall A1 Stand 18).
What products will be on display at the RayForm booth?
Our LCD dental 3D printer lineup, the full dental resin portfolio (model, surgical guide, splint, IBT, temporary crown and bridge, gingiva mask, denture base, and clear aligner resins), clear aligner sheet materials, and the automated post-processing system. Live print demonstrations will run throughout each show day.
How can I book a meeting at the RayForm booth?
The fastest channel is WhatsApp at +86 156 7514 4495, mentioning which show and preferred day. Email contact@rayformtech.com is also available. A 20–30 minute pre-booked slot is recommended for distributors, OEM partners, or labs with specific qualification requirements.
Will RayForm offer on-site material samples?
Sample shipments are arranged after the show rather than handed out at the booth, so we can match the resin choice to your specific printer model, application, and parameter window. Sample requests submitted at the show are typically processed within one to two weeks of show close.
Are the two shows open to general public attendees?
Both events are trade-only and open exclusively to dental industry professionals — dentists, dental technicians, lab owners, clear aligner manufacturers, distributors, and accredited industry press. Registration is handled through each show’s official organizer.
What if I’m interested in OEM or distribution partnership discussions?
Both shows are appropriate venues for an initial OEM or distribution conversation. We’d recommend pre-booking a slot via WhatsApp or email so we can assign the relevant team member and bring the right materials to the meeting.
See You in Casablanca and Rimini
Two cities, two shows, one team. Whether your priority is a chairside printer for a single clinic, a high-throughput aligner production line, or a distribution-scale resin supply relationship, we’re prepared to have that conversation in person this May.
Pre-book your slot at either booth via WhatsApp at +86 156 7514 4495 or email contact@rayformtech.com — or browse our full dental 3D printing solutions ahead of your visit.
References
- Morocco Dental Expo — Salon (7th Edition) — Official organizer page. https://www.mdentalexpo.ma/Page/5554/salon
- Dental News — ICEC Ain Sebaâ Exhibition Center, Casablanca. https://www.dentalnews.com/venue/icec-ain-sebaa-exhibition-center-in-casablanca-morocco/
- Expodental Meeting 2026 — Official home page. https://www.expodental.it/en/
- Expodental Meeting — A Continuously Growing Exhibition (organizer report). https://www.expodental.it/en/expodental-meeting-2025-a-triumph-of-innovation-and-constructive-dialogue-for-the-future-of-dentistry-3/
- Dental Tribune — Expodental Meeting 2026 event listing. https://www.dental-tribune.com/event/expodental-meeting-2026-2/
- MarketsandMarkets — Dental 3D Printing Market Report 2025-2030. https://www.marketsandmarkets.com/Market-Reports/dental-3d-printing-market-258228239.html
- Grand View Research — Dental 3D Printing Market Industry Report 2033. https://www.grandviewresearch.com/industry-analysis/dental-3d-printing-market
- Infodent International — Expodental Meeting 2026 calendar listing. https://www.infodentinternational.com/calendars/2026_5/14070
